🫐
🫐
🫐
🫐
KORUZA V2 PRO
Search…
🫐
🫐
🫐
🫐
KORUZA V2 PRO
System Description
Principle of Operation
Licensing
Regulatory Affairs
EU Funding
SOFTWARE
General Software Overview
KORUZA v2 Pro Firmware
Alignment Engine
Device to Device Management
Graphical User Interface
Mechanics
General Overview of Mechanics
KORUZA v2 Pro
KORUZA v2 Transparent
Electronics
General Electronics Overview
USER DOCUMENTATION
1 Mounting
2 Quickstart
3 Final Check
PRODUCTION
Mechanical Parts Production 2021
Calibration
Link Configuration
Powered By GitBook
3 Final Check

After installation check list

  1. 1.
    Check that all the mounted parts are tight (poles, screws, nuts …).
  2. 2.
    Check all cabling is protected from strong winds, retighten or tighten additionally if necessary.
  3. 3.
    Check all connector and other sealings are tight.
  4. 4.
    Check alignment.
  5. 5.
    Check signal strength on both ends.
  6. 6.
    Check all visible parts for any possible damages that may have occurred during installation.
KORUZA should now transmit data at 1 Gbps (or 10 Gbps).
​
USER DOCUMENTATION - Previous
2 Quickstart
Next - PRODUCTION
Mechanical Parts Production 2021
Last modified 1yr ago
Copy link